Opto Engineering® - 20 years
Home Lighting LED illuminators LTBP series
LTBP192216-B
Specifications
Downloads
Compatible products
Lighting specifications
Modules 4x6
Illumination area width (mm) 192
Illumination area height (mm) 216
Number of LEDs 1152
Light color, peak wavelength blue, 470 nm
Spectral FWHM (nm) 25
Illuminance (1) (klux) n.a.
Diffuser yes
Collimation film no
Electrical specifications
Power supply mode Strobe only, constant current driving
Peak power consumption (W) 299.5
Max pulse current (2) (A) 11.7
Typical pulse voltage (V) 25.6
Max pulse duration (ms) 1
Max duty-cycle (%) 1.5
Max continuous current (mA) 120
Estimated MTBF (3) (hours) > 50000
Connector M8
Cables CBLT003 included
Mechanical specifications
Length (mm) 204
Width (mm) 236
Height (mm) 26
Mass (g) 1823
Clamping system 8x M6 threaded holes
Environmental specifications
Operating temperature (°C) 0-40
Storage temperature (°C) 0-50
Operating relative humidity (%) 20-85, non condensing
IP rating IP40
Installation Indoor use only
Eye safety
Risk group according to CEI EN 62471:2010 Exempt

Last update 03 Aug 2023

CE
ROHS
REACH
WEEE
UKCA

Notes

  1. Minimum value, at max driving current, on emitting surface. Where n.a. is reported data is available upon request.
  2. Models where two currents are listed (such as LTBP240180-R) feature two separate channels.
  3. At 25°C.

Ordering information

Our part numbers are coded as LT2BC xxx yyy - z - a, where:
- xxx defines the illumination area length (in mm),
- yyy defines the illumination area width (in mm),
- z defines the color. R = red, G = green, B = blue, W = white, IR860 = Infrared 860 nm,
- a defines the presence of an optional optical sheet. CO = with collimation films in both horizontal and vertical directions. Leave empty if no optional optical sheet is required. For additional options such as horizontal/vertical linear or circular polarizers, contact us.
All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.

Technical documents

Product user guide
Wiring for Opto Engineering high power LED lights

Datasheet

Download datasheet

Layout files

DXF
IGS
PDF
STEP
Despite the efforts made to generate an error-free compatibility list, we always recommend to consult the Opto Engineering® technical support department before purchasing a compatible product. Opto Engineering® shall not be liable for any damage or malfunctioning caused by the incorrect selection of a compatible product.
LTDV series
LTDV series
LED lighting strobe controllers
LTDV1CH-17V
Strobe controller 1 channel variable current 5 mA - 17A
LTDVE1CH-40F
LED Strobe controller 1 channel, 40A pulsed - 4A continuous, fast version
LTDVE2CH-20F
LED Strobe controller 2 channels, 20A/40A pulsed - 3A/6A continuous, fast version
LTDVE4CH-20
LED Strobe controller 4 channels, 20A pulsed - 2A continuous
LTDV6CH
Strobe controller 6 channels
LTDVE8CH-20
LED Strobe controller 8 channels, 20A pulsed - 2A continuous
CBLT series
CBLT series
Cables for LED illuminators
CBLT003
Illumination cable PVC black, side 1 M8 connector straight, side 2 cable end - 5 m - for single stage systems
CBLT004
Illumination cable PVC black, side 1 M8 connector right angled, side 2 cable end - 5 m - for single stage systems
Request a quote
Add this product to the quote request list.