Opto Engineering® - 20 years
Home Lighting LED pattern projectors
LTPRUP series
Overview
Models
Downloads
Related
Tech Info
Projection
Patterns
Resources

Key advantages

  • LED technology for perfectly sharp edges
    Thinner lines, sharper edges and more even illumination than lasers
  • Ultra high-power light output and strobe mode only operation
    Low sensitivity to ambient light for the inspection of fast moving objects and an extended LED lifetime
  • Repeatable results with dedicated strobe controllers
    Compatible LTDV series ensures very stable illumination intensity
  • Wide selection of projection patterns available (custom-made upon request)
    Chrome-on-glass patterns with geometrical accuracy down to 2 μm
  • Compatible with any C-mount optics
Discover more

Real-world application examples and case histories

Application examples

Please wait
Unable to process your request
Back to models
Filters
Close
Reset Filters
Select 2 or more models to compare specs
Start comparing
Clear selection

Last update 04 Aug 2023

Expand table

Notes

  1. With a 35 mm lens, F/N 1.4 at 100 mm working distance without projection pattern at maximum driving current. Estimated value.
  2. To directly drive the LED, current control is necessary. External compatible controller from LTDV series must be used.
  3. At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. Contact us to check other admissible combinations of duty cycle-frequency-temperature.
  4. At 25° C.
  5. Including connector.
Back to models

Technical documents

Product user guide
Safety warning UV/IR
Wiring for Opto Engineering high power LED lights

LTPRUP pattern projectors can be easily integrated into any vision system thanks to their compact design, multiple threaded holes positioned in the rear part, and compatibility with CMHO016 clamping mechanics. Additionally, the phase-adjustment design allows for easy pattern alignment.

LTPRUP-x models for strobe-only operation featuring ~ 90W peak power intensity. These models are compatible with CMHO016 clamping mechanics, alternatively, three M4 and one M6 threads are available as fixing options.

Projection lens selection

2-3″ C-mount lenses

Telecentric lenses

Projection lens selection

Any C-mount optics for 2/3” sensors (11 mm image diagonal) can be interfaced with LTPRUP series to project areas with different sizes. Unless the projection optics introduces significant distortion, the shape of the projected pattern will preserve the features and aspect ratio of the engraved pattern.

The projected area dimensions will be “M” times the original dimensions of the pattern, where M is the optical magnification at which the selected projection lens is operating.

Telecentric lenses for 2/3” sensors can also be interfaced with LTPRUP models, thus providing telecentric projection of the pattern and enabling unparalleled performance in 3D measurement applications.

2-3″ C-mount lenses

P.D. @50 @75 @100 @150 @200 @250 @300 @400 @500
mm mm mm mm mm mm mm mm mm
Focal
length
D (Projection diameter)
(mm)
6 mm 81 127 172 264
8 mm 58 (*) 92 127 195 264 333
12 mm 35 (*) 58 (*) 81 127 172 218 264
16 mm 41 (*) 58 (*) 92 (*) 127 161 195 264 333
25 mm 55 (*) 77 (*) 99 (*) 121 (*) 165 209 (*)
35 mm 68 (*) 83 (*) 115 146
Expand table

(*) = spacers may be needed to compensate back focal length

Standard C-mount lenses + LTPRUP
Standard C-mount lenses + LTPRUP

Telecentric lenses

TC23004 TC23007 TC23009 TC23016 TC23024 TC23036
P.d.(mm) 56.0 60.1 62.2 43.1 67.2 102.5
D.(mm) 5.5 8.3 11.0 20.8 31.4 45.2
TC23048 TC23056 TC23064 TC23072 TC23080 TC23096
P.D.(mm) 132.9 157.8 181.8 226.7 226.7 278.6
D.(mm) 59.8 70.0 80.0 89.9 99.7 117.8
Expand table
Bi-telecentric lenses + LTPRUP
Bi-telecentric lenses + LTPRUP

Pattern selection

Standard patterns

Custom-made patterns

Pattern selection

The projection pattern can be easily interchanged by unscrewing the retaining ring that holds the pattern. The pattern outer diameter is 21 mm, while the active projection area is a circle of Ø 11 mm.

The pattern drawing could either cover the entire 11 mm diameter area or be of any shape inscribed within this area (such as a 7.78x7.78 mm square or an 8.8 x 6.6 mm rectangle). The projection accuracy depends both on the pattern manufacturing accuracy and the distortion of the projection lens mounted on the projector.

The edge sharpness of the projected pattern depends on both the resolving power of the lens and the engraving technique: laser-engraved patterns (part numbers ending in “L”) or photolithography-engraved patterns (part numbers ending in “P”) can be chosen depending on the type of application.

Standard patterns

Custom-made patterns

Custom-made patterns can be supplied on request. A drawing with accurate geometrical information must be submitted (please refer to the instructions here below).